added network info screen

livingroom.yaml

@@ -27,10 +27,14 @@ sensor:
     pin: A5
     id: plant_0_soil_moisture
     name: "plant_0_soil_moisture"
-    attenuation: 11db
+    attenuation: 12db
     unit_of_measurement: '%'
+    # the max voltage on the adc will be ~3V from the sensor, which would
+    # be a dead short on the prongs
+    # let's say 2V is a good amount of moist, so we compare against that
+    # x = the measured voltage
     filters:
-      - lambda: return x *75;
+      - lambda: return x/2*100;
 
 spi:
   clk_pin: GPIO36
@@ -58,6 +62,15 @@ display:
         it.image(160, 75, id(itlab25));
         it.printf(3, 3, id(hurmit_regular), "Water level:");
         it.printf(50, 35, id(hurmit_regular), "%.1f %%", id(plant_0_soil_moisture).state);
+    - id: page2
+      lambda: |-
+        it.image(0, 0, id(flowerpot));
+        it.image(160, 75, id(itlab25));
+        it.printf(3, 3, id(hurmit_small), "Network Information");
+        it.printf(3, 35, id(hurmit_small), "SSID: %s", id(info_ssid).state.c_str());
+        it.printf(3, 55, id(hurmit_small), "IP: %s", id(info_ip).state.c_str());
+        it.printf(3, 75, id(hurmit_small), "MAC:");
+        it.printf(3, 95, id(hurmit_small),  "%s", id(info_mac).state.c_str());
 
 interval:
   - interval: 5s
@@ -82,9 +95,9 @@ font:
   - file: "HurmitNerdFont-Regular.otf"
     id: hurmit_regular
     size: 28
-    #glyphs: [
-    #  "\u2698", #flower pot
-    #]
+  - file: "HurmitNerdFont-Regular.otf"
+    id: hurmit_small
+    size: 20
 
 output:
   - platform: ledc
@@ -115,5 +128,18 @@ wifi:
     ssid: "Itlabs1 Fallback Hotspot"
     password: "qsri9vnu7Y9n"
 
+# Example configuration entry
+text_sensor:
+  - platform: wifi_info
+    ip_address:
+      name: ESP IP Address
+      id: info_ip
+    ssid:
+      name: ESP Connected SSID
+      id: info_ssid
+    mac_address:
+      name: ESP Mac Wifi Address
+      id: info_mac
+
 captive_portal: